Cnc Aluminum Enhanced Hop-up Unit & Air Nozzle for a&k Pts Acr Series Airsoft

Production Clarification

CNC Aluminum Hopup Chamber ME Pro (with BB Latching Arrangement) unit of measurement is precisely made to improve accuracy and ensure consequent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG serial.
The Hopup Bedroom ME unit has a precision rotary punch blueprint for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to piece of work best with R-hop and Standard-Hop to go on the Bbs shooting direct and authentic on every single shot.
The Hopup Chamber ME unit is designed to have the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping Bbs.
The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold butt tight without wobbling and twisting, and 3 compression springs on top, at lesser and in heart of housing to ensure the hopup unit of measurement is exactly centered, straight and air tight at all times when adjusted to any V2 gear boxes with 11mm or 11.5mm inner bore.
More that, the Hopup Chamber ME Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber past hand.

***The Dual UV LED Boards and Module set and Unmarried UV LED Board west/ Clear Cover and Module set are optional add-ons to glow Bulletin board system in the dark. Operating Voltage from 7VDC - 15VDC (2-four cells LiPo, 6-13 cells NiCad). (Sold separately)
***The Empty Mag Detection Sensor and Electronic Switch Controller are optional add together-ons to end Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

	Includes
	ane x CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit
	2 x Strong Articulate Vinyl Cover
	one x CNC Aluminum Standard-Hop Arm
	ane 10 CNC Aluminum R-Hop Arm
	1 ten Silicone Safe Standard-Hop Nub Damper
	one 10 Silicone Rubber R-Hop Nub Damper
	1 x CNC Aluminum four.5mm length Precision R-Hop Concave Nub
	1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
	1 ten CNC Contumely Threaded Slot Pin
	1 x CNC Delrin Locking C-Clip
	1 x CNC Barrel Brass Spacer
	one ten Brass Spacer Holder Oring
	3 x Steel Compression Leap

	Overall Length: 51mm
	Overall Height: 37.75mm
	Hub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm
	Hub Outer Diameter (to fit into Outer Barrel): min 12mm
	Hub Inner Diameter (to fit Nozzle): max eight.3mm
	Feeder Outer Bore (to fit magazine): min nine.25mm
	Feeder Length (to fit magazine): max 6.25mm
	Material: Aluminum 6061

	Features
	Machined from a solid shipping aluminum block with tight tolerances to provide better accuracy, consistency, and durability
	Improved accuracy and ensure consequent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series
	Precision rotary dial design for fine hopup adjustments
	Re-engineered the hopup levers and concave nubs to work all-time with R-hop and Standard-Hop to go on the BBs shooting directly and accurate on every unmarried shot
	Removable Brass Threaded Slot Pin for setup and maintenance
	Accepted the nozzle length from 21.00mm to 21.25mm
	Fully compatible with most aftermarket soft and difficult prophylactic bucking without losing FPS or dropping Bbs
	Equipped with a new CNC Delrin Locking C-Clip design to agree butt tight without wobbling and twisting
	Equipped with iii pinch springs on top, at lesser and in eye of housing to ensure the hopup unit is exactly centered, straight and air tight
	Compatible with any V2 gear boxes with 11mm or xi.5mm bore
	Specially designed with BB Latching System to forestall dropping BBs after removing the magazine
	Manually opened to release Bulletin board system from within hopup bedroom past hand
	The Dual UV LED Boards and Module set and Single UV LED Lath w/ Clear Embrace and Module set up to glow Bulletin board system in the dark ready!
	The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

	Weight
	N/A grams

	Usage
	Compatible with most Tokyo Marui (include KRYTAC, except KWA) M4/M16 standard AEG version 2 gear box

	Instruction
	Instruction Manuals are included

Tokyo Marui® is a registered trademark of Tokyo Marui Co., Ltd.
KRYTAC® is a registered trademark of KRISS Systems SA in the U.Due south. and other countries.
KWA® is a registered trademark of KWA Performance Industries, Inc.

When yous order from Maxxmodel.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking data for your order'south shipment. You can choose your preferred aircraft method on the Order Information page during the checkout procedure.

The total time it takes to receive your order is shown below:

The total delivery fourth dimension is calculated from the time your order is placed until the fourth dimension it is delivered to you lot. Total delivery time is broken down into processing time and aircraft time.

Processing time: The time it takes to prepare your item(s) to transport from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping fourth dimension: The time for your item(s) to travel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you lot desire to know more information, delight contact the customer service. Nosotros volition settle your problem equally soon as possible. Enjoy shopping!